Home > Products > Fast Thermocouple, Thermal Analysis Cup > Fast Thermocouple > Non Splasing Fast Thermocouple With Protective Paper Tube
Non Splasing Fast Thermocouple With Protective Paper Tube

Nonsplashing fast thermocouple with a protective paper tube is mainly composed of a temperature probe and a nonsplashing paper tube, which is used for measuring the temperature of the molten metal liquid.

inquiry

Install the fast thermocouple with protective paper tube on the temperature measuring gun and return the secondary instrument pointer (or digital display) to zero. This indicates that the contact is good and measurement can be performed.

Fast Thermocouple With Protective Paper Tube Features:

• High measurement accuracy

• Fast Response

• Lightweight structure

• Easy to use

• Protection tube length can be customized

• For measuring the temperature of molten steel and high-temperature molten metal

Fast Thermocouple With Protective Paper Tube Parameters:

Product

Name

Models Graduation Allowable Tolerance Recommended Use temperature Response Time Measured Rate Usage count Remarks
Non-Splash Thermocouple QR-KS604FJA S ±5 1650℃ 2-5S 98% 3-6 The length of thermocouple can be according to customers’requirement
R 1650℃
B 1760℃

Product Instructions:

1. According to the object and range of measurement, choose the appropriate protection of the length of the paper tube and the applicable temperature gun.

2. Install the fast thermocouple on the temperature measuring gun and return the secondary instrument pointer (or digital display) to zero. This indicates that the contact is good and measurement can be performed.

3. The depth of the hot thermocouple inserted into the molten steel should be 300-400mm. Do not measure the wall or the slag on the measurement. Do Fast, steady, and accurate. When the secondary instrument gets the result, the gun should be taken immediately, and rapid thermal power should be applied. Even in the molten steel immersion time should not exceed 5 seconds, otherwise, it is easy to burn the temperature gun.

4. After the temperature gun is lifted from the furnace, remove the used thermocouple and install a new one, pause for a few minutes, and prepare for the next measurement. Do not test and disconnect, otherwise, the temperature difference will fluctuate.

fast thermocouple

Service:

First of all, our factory adheres to the principle of quality first. We have a group of professional technical and inspection personnel to focus on product quality control and Technological innovation. For each product, we have strict process inspection and factory inspection. We have a well export experience, to provide customers with professional pre-sales and after-sales service and technical support. The sales process will be active tracking queries, positively solving the problems in the follow-up use of customers.