Home > Products > Filters For Casting > Honeycomb Ceramic Filter > Dry Pressed Honeycomb Ceramic Filter
Dry Pressed Honeycomb Ceramic Filter

The dry Pressed Honeycomb ceramic filter is made of material of mullite or cordierite ceramics. It is able to get rid of the metal impurity, refractory scrap, solid refractory alloy, sinter, and molten metal liquid when casting products, reduce the air vent of castings, raise the casting quality, and reduce the cost.

inquiry

Product Features:

1. The pressed honeycomb ceramic filter can purify the metal liquid, absorb the oxide, and filter the non-metal impurities.

2. Making the metal liquid flowing at a stable speed, reducing the vortex and reducing the bubbles in the cast part.

3. Equalizing the phase structure and prolonging the tool’s lifetime.

4. Improving the cast part surface performance and improving the density of the cast part.

Parameters of Pressed Honeycomb Ceramic Filter:

Material Cordierite and mullite, Cordierite/mullite, Mullite/zirconia, High aluminum, Silicon carbide, etc.
Operating Temperature ≤1500℃
Color white
Hole size 100/200/300 CSI
Hole Rate 38-60%
Compressive Strength ≥15Mpa
Impact Thermal Resistance >5
 Bulk Density 0.8-1.2g/cm³
Normal Size:

37×37mm,43.5×43.5mm,49×49mm,55×55mm,66×66mm,81×81mm

Thickness:

9.5mm,12.5mm,15mm

Application of Pressed Honeycomb Ceramic Filter:

1. As a catalyst carrier, ceramic honeycomb materials are usually used to purify automobile emissions and eliminate odors.

2. As a heat exchange medium, ceramic honeycomb material is mainly used in the heat recovery unit of RTO, not ceramic saddle

3. Ceramic honeycomb material is used as the filtrate matrix, usually used in food processing, water treatment, environmental industry, metallurgical industry, etc.

honeycomb ceramic filters application

Size and Specifications:

Due to their basic filtering capacity and high heat capacity, these Ceramic Honeycomb Strainers are used rather in smaller dimensions and thickness for grey cast iron castings. The Ceramic Honeycomb Strainer captures particular slags and makes mould filling more homogeneous and uniform, thus increasing purity of the cast metal and eliminating sand mixture erosion during casting.

Class Dimension (mm) Hole Size (mm) Wall Thickness (mm) Heat Transfer Area (m2/m3) Porosity (%)
Ceramic Honeycomb Filter with Square Holes 40*40*12 1.3 0.45 1580 51.3
40*40*12 1.92 0.6 1190 57
50*50*12 1.3 0.45 1580 51.3
50*50*12 1.92 0.6 1190 57
55*55*12 1.3 0.45 1580 51.3
55*55*12 1.92 0.6 1190 57
66*66*12 1.3 0.45 1580 51.3
66*66*12 1.92 0.6 1190 57
Ceramic Honeycomb Filter with Round Holes 40*40*10 2.3 1.0 758 43.6
40*40*12.5 2.3 1.0 758 43.6
50*50*12.5 2.3 10. 758 43.6
55*55*10 2.0 1.0 1190 40
66*66*12.5 2.3 1.0 758 43.6
75*75*15 2.3 1.0 758 43.6
81*81*12 2.3 1.0 758 43.6
81*81*15 2.3 1.0 758 43.6
100*100*20 3.5 1.0 590 51
132*132*20 5.0 1.2 438 57
Ceramic Honeycomb Filter with Triangle Holes 40*40*12 2 0.45 1395 40
50*50*12 2 0.45 1186 40
66*66*12 3 0.7 1186 52
75*75*12 3 0.7 1186 52
82*82*13 3 0.7 1186 52
100*100*15 3 0.7 1186 52